The Gen-R is a key model for surf racing and all-round paddling.
The slightly recessed deck has been optimised to provide a high level of stability while being easy to handle when launching from the beach and getting back on the board.
The lower rail height and reduced nose thickness are highly sought after for technical races, buoy turns and GUARANTEE easy handling in choppy conditions.
A great compromise between the flat water sprint model and the all-star model for the open sea.
FASTER ACCELERATION
The low nose rocker and narrow nose outline increase acceleration and overall efficiency on the flat. This acceleration is important for technical races, beach starts and explosive sprints after buoy turns.
STABLE TURNING AND STABILITY FROM THE TAIL
The wider tail contour in combination with the flat deck make it very easy to turn and manoeuvre the board and still remain stable during the turn.
The narrow outline on the nose is designed to plane efficiently in flat water as well as on ocean waves. The lower nose rocker is similar to the Sprint in its construction and extends the waterline for faster acceleration and longer planing. Although the low nose rocker helps with early bump detection, the rider should still apply additional pressure to the back of the board when bumps are surfed.
The nose volume is designed to withstand a medium swell and also works in surf and flat water during technical races. It is generally thinner than the All Star - by about 4 cm in thickness.
The deck has been designed to have a slightly lowered footprint to ensure unrivalled stability. At the same time, the sidewalls are low, making it much easier to launch from the beach and get back on the board.
The soft, round rails run the entire length of the board. This makes it possible to keep your balance even in choppy conditions and to be predictable in the surf and downwind. The round rails are wide for stability and balance.
The best bottom shape for a range of conditions: The flat bottom is fast in all conditions, from surf to sprint. In addition, it makes riding in flat and choppy ocean conditions very predictable and controllable.
Features a wide tail with a sharp release. Turning is super easy on this model, and the wide part gives you maximum control even in the surf
A single centre drain hole allows water to drain completely from the semi-submerged deck. Although hardly any water remains on the deck when paddling, the drain hole drains excess water from the cockpit. The recessed carbon scupper minimises drag and ensures clean drainage.
The Gen-R is the specialist for technical and beach racing. The grips are modular with our screw system for fine-tuning the grip positioning.
The Gen-R is our first race model with a 10" fin box to fine tune fin preference. We have equipped the Gen-R with a larger box for more customisation. Short distance races would benefit from a fin further forward for fast turns, while longer races would benefit from a fin further back in the box. The placement of the box varies when downwinding as some riders prefer less or more tracking when surfing.
One of the key design criteria for the Gen-R was to minimise weight and achieve the thin profile of a technical race board. This much anticipated model has been built thinner for faster acceleration, easy beach starts and to guarantee performance in the surf. The thinner profile also helps to maintain control in crosswinds and side chop.
Ensures a dry ride for your gear/luggage. Available in 14'0″ x 27″ and 14'0″ x29″.
The 3k pre-impregnated carbon biax is an ultra-lightweight weave and ensures super stiff performance throughout the fin. The trailing edge has a super sharp 0.4mm width for clean hydrodynamics. The new fin series ensures speed and performance like never before.
Reduces paper waste and protects the board from dust, scratches and UV damage. Made from stretchy polyester, it adapts to different board shapes. The iconic blue board sock with secure drawstring fastening ensures optimum board care.
| Model | 14'0″ x 29″ | 14'0″ x 27″ | 14'0″ x 25″ | 14'0″ x 23″ | 14'0″ x 21.5″ |
|---|---|---|---|---|---|
| Rider Weight | Up to 120kg | Up to 110kg | Up to 100kg | Up to 90kg | Up to 80kg |
| Length | 14'0″ / 426.7 cm | 14'0″ / 426.7 cm | 14'0″ / 426.7 cm | 14'0″ / 426.7 cm | 14'0″ / 426.7 cm |
| Width | 29″ / 73.7 cm | 27″ / 68.6 cm | 25″ / 63.5 cm | 23″ / 58.4 cm | 21.5″ / 54.6 cm |
| Thickness | 9.5″ / 24.1 cm | 9.6″ / 24.3 cm | 9.4″ / 23.8 cm | 9.4″ / 23.8 cm | 9.6″ / 24.3 cm |
| Tail width | 16.6″ / 42.2 cm | 16.4″ / 41.7 cm | 15.5″ / 39.3 cm | 15.0″ / 38.9 cm | 14.7″ / 37.4 cm |
| Volume | 356 L | 337 L | 317 L | 296 L | 282 L |
| Fin Set Up | Single | Single | Single | Single | Single |
| Fins | Flash+ | Flash+ | Flash | Flash | Flash |
| Weight | Blue Carbon: 14.8 kg (Est.) | Blue Carbon Sandwich: 13.0 kg (Est.) Blue Carbon: 14.0 kg (Est.) | Blue Carbon Sandwich: 12.6 kg (Est.) Blue Carbon: 13.2 kg (Est.) | Blue Carbon Sandwich: 11.6 kg (Est.) Blue Carbon: 13.1 kg (Est.) | Blue Carbon Sandwich: 11.3 kg (Est.) |
Board weight tolerance +/- 5%











