The LIGHT DONE RIGHT CONSTRUCTION makes the legendary, extremely crisp and responsive wave sail with the most direct power on/off switch even lighter, better and with the usual wide range of use. It works with single or multi-fin wave boards and even in freewave jumping conditions.
With 4 battens and a Full-XPly construction, the new SUPER_STAR HD is perfectly equipped for ambitious wave riders. However, it has a front-lying profile that stands for a very strong performance spectrum and extremely wide range of use from classic wave riding to freewave bump&jump. The SUPER_STAR HD easily manages the balancing act from a perfect day with classic down the line conditions to sessions in gusty, sometimes underpowered onshore conditions. The smaller sizes (4.2 and smaller) in particular have been extensively optimised for maximum control when jumping and riding downwind.
The excellent performance is mainly determined by the more forward and slightly higher pressure point. This gives the SUPER_STAR HD a very pleasant character of its own, with ride and handling characteristics that immediately feel familiar. You don't need any time to get used to it in order to be able to attack directly. The sail is always light and balanced in the hand, but reacts very directly and spontaneously - also when it comes to power on/off. Riders who prefer tri-fin boards, who like to do radical cutbacks in a minimum of space and who sometimes steer the board with their back foot will love the new SUPER_STAR HD! It can be laid down playfully in the bottom turn and the propulsion set to "off", thrills with hardly noticeable batten rotation and generates enough propulsion to keep the speed high even in onshore wind to attack the next wave. Since the sail generates more lift in the upper area, the board gets lift earlier via the rig and glides better.
All this works even better and easier now that the new SUPER_STAR HD has undergone a fitness and slimming cure with the LIGHT DONE RIGHT CONSTRUCTION. Behind this are an optimised panel layout, reinforcement patches with a high-strength high-modulus fibre "Made in Germany" as well as a new mast pocket construction, which is why, depending on the sail size, 200 to 300 g less are on the scales! In contrast to other brands, the material thickness of the centre panel has not been reduced, which means that the well-known durability of the SUPER_STAR HD does not suffer in any way! On the contrary: the entire sail is now made of XPly, which minimises possible damage after a wash and at the same time gives the sail a slightly more elastic behaviour.
Performance, dynamics and riding feel benefit from the modified mast pocket construction, which no longer has a seam at the leading edge (ONE PIECE SLEEVE). This allows for millimetre-precise tuning and a refined shape and results in a sensitive, more harmonious reflex. Together with a slightly reduced preload, the sail produces a softer power development. This makes it more stable to ride and very balanced in the hand.
The SUPER_STAR HD scores with the convincing combination of performance, handling and control, on/off and the necessary power to have maximum fun even in moderate conditions.
An important note:
DUOTONE is the only sail brand to offer two different wave sails: the SUPER_HERO with a central-low pressure point and the SUPER_STAR HD with a forward, high pressure point. Both have their own character, ride differently and convey their own feeling. Therefore, you should not mix sails with different pressure points in the Quiver, otherwise you will have to get used to them every time you change sails. This also applies to mixing DUOTONE sails with sails from other brands. You can find out what goes together and what doesn't here.
Weight reduction by a noticeable 200 to 300 g without reducing the film thickness, while maintaining the well-known durability and longevity!
Each sail carries individually defined visual specifications for correct outhaul tension (requires VTS TAIL boom).
100% XPly HD construction for maximum ripstop
No more seam at the leading edge >> 80 g less weight and no hardening due to overlapping panels
The optional trim indicator allows you to trim the luff "to the point" without ever having to check the loose leech in the top (patent pending)
The lightest protector on the market, with integrated luff trim indicator slot.
Unbreakable epoxy battens
Factory calibrated individual batten tensions by means of torque
| SIZE | 3.7 | 4.0 | 4.2 | 4.5 | 4.7 | 5.0 | 5.3 | 5.7 |
| BOOM MAX (CM) | 150 | 150 | 154 | 158 | 164 | 166 | 172 | 176 |
| VTS TAIL TENSION | Min +3 >< Max +5 | Min +3 >< Max +5 | Min +3 >< Max +5 | Min +3 >< Max +5 | Min +3 >< Max +5 | Min +3 >< Max +5 | Min +3 >< Max +5 | Min +3 >< Max +5 |
| LUFF MAX (CM) | 360 | 374 | 380 | 388 | 404 | 412 | 430 | 438 |
| VARIO/FIX TOP | VARIO | VARIO | VARIO | VARIO | FIX | FIX | FIX | FIX |
| BATTENS | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| WEIGHT (KG) | 2.70 | 2.80 | 2.90 | 3.00 | 3.10 | 3.20 | 3.30 | 3.40 |
| MAST TYPE (BEST/ALT.) | PLATINUM / GOLD>SILVER | PLATINUM / GOLD>SILVER | PLATINUM / GOLD>SILVER | PLATINUM / GOLD>SILVER | PLATINUM / GOLD>SILVER | PLATINUM / GOLD>SILVER | PLATINUM / GOLD>SILVER | PLATINUM / GOLD>SILVER |
| MAST GEO (BEST/ALT.) | RDM/-- | RDM/-- | RDM/-- | RDM/-- | RDM/-- | RDM/-- | RDM/-- | RDM/-- |
| MAST LENGTH (BEST/ALT.) | 340/370 | 370/400 | 370/400 | 370/400 | 400/-- | 400/-- | 400/-- | 430/-- |










